Leak Detection in Kent, WA
Short answer: To check for a hidden leak, turn off every faucet and water-using appliance, then watch the water meter's leak indicator for 10 to 30 minutes. If it moves, water is leaking after the meter. In Kent, the homeowner is responsible from the meter to the house. A running toilet is the most common hidden leak.
A water bill that jumped, a meter that spins with everything off, or a damp spot that keeps spreading all point to a hidden leak. Try the 10-minute meter test below, then email hello@kentwaplumbers.com if it confirms a leak.
Kent WA Plumbers is an independent referral service, not a plumbing company. Your request is passed to an independent, locally licensed plumbing company. Disclosure
Phone line coming soon. Email us now.
Updated · Written by the Kent WA Plumbers editorial team (a referral service, not a licensed plumber) · Fact-checked against the public sources linked on this page · How we research guides
How do you test for a leak with your water meter?
- Turn off every faucet, the dishwasher, washing machine, ice maker and irrigation.
- Find your meter. It's usually in a concrete box near the street or sidewalk. Lift the lid carefully, since spiders and standing water are common.
- Watch the small leak indicator dial, or write down the full reading.
- Wait 10–30 minutes without using any water, then check again.
- Any movement means a leak after the meter. Next, close the main shut-off at the house. If the meter still moves, the leak is in the buried service line between the meter and the house. If it stops, the leak is inside.
That second step tells a plumber a lot before they arrive. Mention it when you email hello@kentwaplumbers.com.
Where do leaks hide in Kent homes?
- Toilets. Worn flappers and fill valves are the most common silent leak. Do the food-coloring test first; it's free.
- Crawlspaces. Many Kent ramblers and split-levels run supply lines under the floor. A slow leak there can go unnoticed for months. Look for wet vapor barrier, musty smells or sagging insulation.
- Buried service lines. The line from the meter to the house can leak underground, sometimes showing up only as a soft or extra-green patch of lawn.
- Older pipe materials. Kent's median home was built in 1985 and about 38% of homes date from the 1970s and 1980s (Census ACS 2020–2024). That era overlaps the use of polybutylene supply pipe (roughly 1978–1995), which is known for failing at fittings. Galvanized steel in older homes corrodes from the inside. See repiping.
- Behind showers and tubs. Failed grout, caulk or valve bodies leak into the wall. Look for loose tile, peeling paint on the other side of the wall, or stains on the ceiling below.
- Water heaters and appliances. Relief-valve drips, washer hoses, fridge water lines.
- Outdoor faucets after a freeze. A split inside the wall leaks only when the hose is turned on. Check it on the first warm day of spring.
Which signs shouldn't you ignore?
- A water bill noticeably higher than the same period last year, with no change in use
- The sound of running water when everything is off
- Warm spots on a floor (a hot-water line leak), or a water heater that runs constantly
- Stains, bubbling paint, warped baseboards or a musty smell
- Low water pressure throughout the house
What does professional leak detection involve?
A plumber starts with the same meter test, then narrows it down: closing valves to isolate hot from cold and inside from outside, pressure-testing sections, and using listening equipment, thermal imaging and moisture meters to pinpoint the spot. Done well, it means opening one small section of drywall or lawn instead of several. Ask up front whether detection is billed separately from the repair, and whether the company patches the access hole.
What should you do after the leak is fixed?
- Dry it out. The EPA advises drying water-damaged materials within 24–48 hours to prevent mold. Wet insulation and drywall in a wall cavity may need professional drying.
- Keep the invoice. Your water provider may offer a leak adjustment with proof of repair, and your insurer will want it if you file a claim.
- Consider a shut-off upgrade. If your main valve is hard to reach or stuck, have it replaced while the plumber is there. Why your main shut-off matters.
How much does leak repair cost?
HomeGuide lists fixing a typical leak at $150–$850 and repairing a ceiling leak at $700–$3,000, depending on access and damage. Detection time, buried-line repairs and drywall patching vary widely, so get the price for each part in writing. More in the Kent plumbing cost guide.
Leak, clog or no hot water?
Email hello@kentwaplumbers.comPhone line coming soon. Email us now. Write to hello@kentwaplumbers.com with your ZIP code and what is wrong. Your request is passed to an independent, locally licensed Kent-area plumbing company. Ask for the company name, its L&I license number and the price before any work starts.
Sources
- City of Kent, "Who Do I Call…" (City responsible from main to meter; other water providers in Kent)
- U.S. Census Bureau, ACS 2020–2024 5-year estimates for Kent (via Census Reporter)
- The Seattle Times archive, polybutylene pipe failures and the class-action settlement
- U.S. EPA, A brief guide to mold, moisture and your home
- HomeGuide, Plumbing price list
Questions people ask
How do I check for a water leak with my meter?
Turn off every faucet and water-using appliance, note the meter reading or watch the small leak indicator (often a triangle or star), and wait 10 to 30 minutes without using water. If the reading changes or the indicator moves, water is leaking somewhere after the meter.
Who pays for a leak between the meter and my house in Kent?
The homeowner. The City of Kent's responsibility runs from the water main to the meter; the service line from the meter to the house and everything inside is the owner's. If the leak is on the street side of the meter, call your water provider.
What is the most common hidden leak?
A running toilet. A worn flapper can waste a lot of water silently. Put a few drops of food coloring in the tank and wait 15 minutes without flushing; color in the bowl means the flapper is leaking.
How do plumbers find leaks without tearing out walls?
They isolate sections of piping and pressure-test them, listen with acoustic equipment, scan with thermal cameras and moisture meters, and sometimes use tracer gas on buried lines. The aim is to open one small, targeted spot instead of guessing.
Can I get money back on my water bill after a leak?
Some water providers offer a one-time leak adjustment once you show proof of the repair. Kent addresses are served by several providers, so ask the one on your bill what its policy is, and keep the plumber's invoice.