What Plumbing Costs in Kent, WA

Short answer: Plumbing in Kent usually costs more than national averages. Published guides list standard plumber labor at about $45 to $200 an hour (HomeGuide, Angi), and Seattle-area plumber wages run about 49% above the national median (BLS, May 2025). Service-call fees are often $50 to $200 (HomeGuide). Every range here is typical, not a quote.

Straight answers with sources. Every range below comes from a published cost guide or government wage data, and it's typical, not a quote. The plumber gives you the real price after seeing the job.

Email us How this works

Kent WA Plumbers is an independent referral service, not a plumbing company. Your request is passed to an independent, locally licensed plumbing company. Disclosure

Phone line coming soon. Email us now.

Updated · Written by the Kent WA Plumbers editorial team (a referral service, not a licensed plumber) · Fact-checked against the public sources linked on this page · How we research guides

How much do Kent plumbers charge per hour?

ItemTypical rangeSource
Standard hourly rate$45–$150/hr; $45–$200/hr (avg. ~$125)HomeGuide; Angi
Service call / trip fee$50–$200HomeGuide
Evening rate$60–$300/hrAngi 2026
Weekend rate$80–$400/hrAngi 2026
Holiday rate$120–$600/hrAngi 2026
Emergency job, Seattle area (all-in)$415–$2,250Angi 2026

The local adjustment: the median wage for plumbers, pipefitters and steamfitters in the Seattle–Tacoma–Bellevue metro was $95,230 in May 2025, about 49% above the national median of $63,800 (BLS Occupational Employment and Wage Statistics). Labor is the biggest part of most plumbing bills, so Kent prices generally sit in the upper half of national ranges. Angi's Seattle emergency range is one of the highest of the cities it lists.

What do common plumbing jobs cost?

JobHomeGuideAngi (2026)
Unclog a drain$100–$275~$220 typical flat rate
Toilet repair$100–$300$150–$375
Faucet installation$120–$300–
Fix a leak$150–$850–
Burst / pipe repair$400–$2,000$150–$5,000 (burst pipe)
Water heater repair$150–$700$225–$975
Water heater installation (tank)$600–$1,800–
Tankless water heater installation$800–$3,500–
Sewer camera inspection$125–$500–
Sewer line cleaning$150–$800–
Main sewer line repair / clog$1,880–$3,700 (repair)$1,325–$5,000 (emergency clog)
Whole-house repipe$2,280–$5,120 (new pipes)$1,500–$15,000; avg. $7,500

National ranges; "–" means that source doesn't publish a figure for that job. These are not quotes and not prices from any particular Kent company.

What makes a plumbing bill go up?

How can you avoid a surprise bill?

  1. Ask on the phone: "What's your trip or diagnostic fee, your hourly or flat-rate pricing, and is the trip fee credited to the repair?"
  2. Ask for the price before the repair starts. Flat-rate (per job) pricing is common, so get it in writing, even by text.
  3. In an emergency, approve only "stop the leak and make it safe," then compare quotes for the permanent fix during business hours.
  4. For jobs over a few hundred dollars, get two or three written quotes that list the same scope: materials, permit, patching, warranty.
  5. Check the company's license, bond and insurance in L&I's Verify tool. See how to choose a plumber.

How can you legitimately spend less?

Leak, clog or no hot water?

Email hello@kentwaplumbers.com

Phone line coming soon. Email us now. Write to hello@kentwaplumbers.com with your ZIP code and what is wrong. Your request is passed to an independent, locally licensed Kent-area plumbing company. Ask for the company name, its L&I license number and the price before any work starts.

Sources

Cost questions people ask

How much do plumbers charge per hour in Washington state?

National guides list standard plumber labor at about $45 to $150 an hour (HomeGuide) or $45 to $200 an hour, averaging around $125 (Angi). Plumber wages in the Seattle–Tacoma–Bellevue metro are about 49% above the national median (BLS, May 2025), so expect Kent rates toward the upper part of those ranges.

Why do plumbers charge a trip or service fee?

It covers travel and diagnosis. HomeGuide lists typical service-call fees of $50 to $200, often covering the first hour or credited toward the repair. Ask on the phone whether it's credited.

Is there a cheap plumber in Kent, WA?

The lowest hourly rate isn't always the lowest bill. A licensed plumber who diagnoses correctly the first time often costs less overall. Save money by booking non-urgent work during business hours, bundling small jobs into one visit, and getting written quotes for anything over a few hundred dollars.

Do plumbers charge more on weekends?

Usually. Angi's 2026 data shows typical hourly rates of about $60–$300 in the evening, $80–$400 on weekends and $120–$600 on holidays, compared with $40–$200 during normal hours.

Should I pay upfront?

For small repairs, payment on completion is normal. For larger jobs such as a repipe or sewer replacement, a deposit is common, but avoid paying most of the price before work starts, and never pay cash to someone who can't show an L&I license.

Phone line coming soon · Email us