Water Heater Repair and Replacement in Kent, WA
Short answer: Repair a water heater when the tank is sound and a part has failed, such as a thermostat, element or igniter; replace it when the tank itself leaks. HomeGuide lists standard tank installation at $600 to $1,800. For 2026, Puget Sound Energy pays $1,000 back on qualifying heat pump water heaters, or $1,100 for income-qualified households.
No hot water, rusty water, or a puddle under the tank? Email hello@kentwaplumbers.com to reach a local licensed plumber. Here's how to decide between a repair and a new heater.
Kent WA Plumbers is an independent referral service, not a plumbing company. Your request is passed to an independent, locally licensed plumbing company. Disclosure
Phone line coming soon. Email us now.
Updated · Written by the Kent WA Plumbers editorial team (a referral service, not a licensed plumber) · Fact-checked against the public sources linked on this page · How we research guides
What should you check before you call?
- Gas heater, no hot water: look through the sight window. If the pilot is out and you smell gas, leave and call PSE at 1-888-225-5773 from outside. If there's no gas smell, the relighting steps are on the label on the tank.
- Electric heater, no hot water: check for a tripped breaker. If it trips again right away, leave it off and call. That usually means a failed heating element.
- Not enough hot water: sediment, a failed lower element or a broken dip tube are common culprits. It can wait for regular hours.
- Water on the floor: find where it's coming from. Fittings on top or the relief-valve pipe may be repairable; a wet tank bottom usually is not.
Repair or replace?
| Situation | Usually |
|---|---|
| Failed thermostat, element, igniter, thermocouple or gas valve; tank dry | Repair |
| Relief valve dripping | Check the water pressure and expansion tank, then replace the valve. Never cap it |
| Leak from the tank body or a rusted bottom | Replace: tanks can't be patched |
| Rusty hot water only, the tank is out of warranty | Likely replace; ask the plumber to check the anode first |
| Rumbling or popping, older unit | Flush the sediment; replace if it's near end of life anyway |
The label on the tank shows the model and manufacture date, and the warranty length (often 6 to 12 years) is a decent hint at expected life. Have that photo ready when you email hello@kentwaplumbers.com.
Tank, tankless or heat pump?
- Standard tank (gas or electric): lowest upfront cost and a simple like-for-like swap. Good when you just need hot water back quickly.
- Tankless (on-demand): endless hot water and wall-mounted, but higher upfront cost. Gas units often need new venting and a larger gas line, and they need periodic descaling.
- Heat pump water heater (hybrid electric): pulls heat from the surrounding air and uses far less electricity than a standard electric tank. It needs space and airflow around it (a garage or large utility room is ideal), plus a condensate drain. With the PSE rebate it can be the best-value electric option.
How does PSE's 2026 heat-pump water heater rebate work?
Most of Kent gets electricity from Puget Sound Energy. For 2026, PSE pays $1,000 on qualifying Tier 3 or Tier 4 heat pump water heaters, or $1,100 for income-qualified households through its Efficiency Boost program. Key rules from PSE's rebate page:
- You must be a PSE electric customer in a single-family home (detached, or attached buildings of four units or fewer)
- The unit must be new, on PSE's qualified product list, and installed on or after January 1, 2026
- Apply within 30 days of installation, with the paid invoice showing install date, address, brand and model
- One rebate per home; the rebate can't exceed the post-tax price
Some installers apply the rebate on the invoice for you. Ask before you sign.
Which safety items should a good installer include?
- Earthquake strapping. Kent is in an active seismic region, and the plumbing code used in Washington requires water heaters to be strapped so they can't tip and break gas or water lines.
- Temperature and pressure relief valve with a discharge pipe run to an approved location.
- Expansion tank where the home has a pressure-reducing valve or check valve, a common cause of relief-valve dripping.
- Correct venting for gas units, and a drain pan where a leak would damage finished space.
- The permit and inspection your city requires. Ask whether it's included in the quote.
How much does water heater repair or replacement cost?
- Water heater repair: $150–$700 (HomeGuide); $225–$975 (Angi, 2026)
- Standard tank installation: $600–$1,800 (HomeGuide)
- Tankless installation: $800–$3,500 (HomeGuide)
National ranges; Seattle-area labor typically lands in the upper half. Subtract the PSE rebate for a qualifying heat pump unit. See the Kent plumbing cost guide.
Leak, clog or no hot water?
Email hello@kentwaplumbers.comPhone line coming soon. Email us now. Write to hello@kentwaplumbers.com with your ZIP code and what is wrong. Your request is passed to an independent, locally licensed Kent-area plumbing company. Ask for the company name, its L&I license number and the price before any work starts.
Sources
- Puget Sound Energy, Heat pump water heater rebate (read November 2026) and Report a gas emergency
- IRS, Energy Efficient Home Improvement Credit
- HomeGuide, Plumbing price list; Angi, Emergency plumber cost (2026)
- Washington L&I, Plumber certification (water heaters are part of the plumbing trade)
Questions people ask
Does PSE give a rebate for a heat pump water heater in 2026?
Yes. Puget Sound Energy pays $1,000 back on qualifying Tier 3 or Tier 4 heat pump water heaters ($1,100 for income-qualified customers through Efficiency Boost) for PSE electric customers in single-family homes, for equipment installed on or after January 1, 2026. You must apply within 30 days of installation, and the unit must be on PSE's qualified product list.
Should I repair or replace my water heater?
Repair if the tank itself is sound and the problem is a part: a thermostat, heating element, igniter, gas valve or the temperature and pressure relief valve. Replace if the tank is leaking from the body, the water is rusty from inside the tank, or the heater is past its warranty and needs a major part.
What does a new water heater cost?
HomeGuide lists standard water heater installation at $600 to $1,800 and tankless installation at $800 to $3,500. Water heater repairs run $150 to $700 (HomeGuide) or $225 to $975 (Angi, 2026). Venting changes, gas-line work, earthquake strapping, expansion tanks and permits can add to the price.
Is a leaking water heater an emergency?
A drip from a fitting can usually wait a day. Water coming from the tank itself, or a steady flow from the relief valve, means you should shut the cold-water supply valve, turn off the gas or power, and call. A tank failure can release its whole contents onto the floor.
Is there still a federal tax credit for water heaters?
The federal Energy Efficient Home Improvement Credit (25C) is not available for equipment placed in service after December 31, 2025, according to the IRS. In 2026 the PSE rebate is the main incentive for Kent homeowners.